 |
 |
 |
Quantities
Sample orders to container loads. |
 |
|
Special Alloys
1060, 5052, 5056, 5182, 5252 and alternatives to T temper. |
|
Heat Treatable
Alloys 2024, 6061, 7075 in thicknesses from 0.20mm. |
|
Tempers
All cold rolled tempers, including fully soft (annealed or “O” temper). |
|
Common Alloys
1050, 1070, 1100, 1145, 1350, 3003, 3004, 3005, 3103, 3104, 5005, 5050, 5657, 5754, and others. |
|
Brazing Alloys
E.g., 3003 core 1 side clad 10% 4104 (4104/3003/4104) and many others, please inquire. |
|
Thicknesses
0.102mm-4mm. Tight thickness tolerances to 1/4 commercial ( +/-0.006mm). |
|
Widths
4.75mm-940mm. Tight tolerance slitting. |
|
Coil Sizes
76.2mm-508mm inner diameter and up to 1930mm Maximum outer diameter. |
|
Special Applications
Deep drawing, anodising quality, minimum earing, fine grain, metallurgical assistance available. |
|
Finishes
Wide variety of rolled finishes available, from 2 sides bright to matte. United’s standard Z-mill finish is 2-6 micro-inch (which is similar to commercial bright finish.) |
|
Special Processing
Painting, anodising, strippable plastic coating, levelling, cut to length, heat treating |
|
On-Time Shipments
Over 98% On-Time Worldwide shipment rating |
|
Custom Packaging
Export packaging to meet your needs, including vacuum sealed, moisture protected, and boxed. |
|
All packaging complies with IPPC standards
All alloys meet RoHS requirements |
|
|
|
|
|
